Grounding the Wavion WBS-2400
C
AUTION
the outdoor data protection device to a ground rod or a bonded pipe. Make sure you
have completed grounding before you connect power to the WBS-2400.
The method for grounding the Wavion WBS-2400 is shown in the figure below.
Figure 3.15. Grounding Method
:
You must always install an external grounding wire. You must also ground
Grounding
10 AWG wire to
ground
Installing the Wavion WBS-2400 Metro Base Station
screw
Grounding strap
on pipe or
grounding rod
Installation Guide
23