Streetlight Mounting - Wavion WBS-2400-POE-FCC Installation Manual

Installing the Wavion WBS-2400 Metro Base Station
Slide the WBS-2400 onto the tray. Insert three 8mm stainless steel hex head machine
3.
bolts from underneath the tray into the WBS-2400. Use a 5mm Allen wrench to tighten
the bolts.
Insert
bolts
Figure 3.11. Attaching the WBS-2400 to the Tray
To continue installing the WBS-2400, see

Streetlight Mounting

You can mount the Wavion WBS-2400 on the horizontal or angled arm of a streetlight.
To mount the Wav ion WBS-2400 on a st reetli ght
Choose a mounting location. You can attach the WBS-2400 to any streetlight arm with
1.
diameter of 3 to 10 inches.
Slip the bands of the hose clamps through the inner slots of the pole bracket. Choose the
2.
slot that is appropriate for the diameter of the mast.
Use the hose clamps to fasten the pole bracket to the pole.
3.
N :
OTE
supply your own hose clamps is you need a different size.
Attach the back plate to the pole bracket as labeled #1 in
4.
20 Wavion
The hose clamps supplied supports a mast diameter of 3-6 inches. You can
Grounding the Wavion WBS-2400 on page
Figure 3.12
23.