Preparing For Installation; Installation Hardware And Tools - Wavion WBS-2400-POE-FCC Installation Manual

C
AUTION
listed devices having an environmental rating equal to or better than the enclosure
rating to close all unfilled openings.
C
AUTION
suppressor device in the branch circuit to limit expected transients to Overvoltage
Category II values. The limits are based on IEC60664 and are also located in Table
2H of UL60950 (for mains 110V, the transient rating is 1500V).
C
AUTION
C
AUTION
kept when the system is operated.
C
AUTION
instructions.

Preparing for Installation

The Wavion WBS-2400 must be installed by a trained professional, or systems integrator
who is familiar with RF planning issues and regulatory limits as defined by the governing
body of the country in which the unit will be installed.
The following lists the equipment required for installation and explains how to prepare the
installation site.
W
ARNING
frequency or enhancing the transmit output power through the use of external
amplifiers or other equipment is illegal.
W
ARNING
of this device causes no harmful interference to authorized radio stations. This device
shall not influence aircraft security and/or interfere with legal communications. If this
device is found to cause interference, the operator of this equipment shall cease
operating this device immediately.

Installation Hardware and Tools

Wavion provides the following accessories to install the Wavion WBS-2400:
One pole bracket
•
Two 3-6-inch diameter worm drive hose clamps
•
Seven 8mm stainless steel hex head machine bolts
•
Allen wrench - 4mm and 5mm
•
Six Antennas
•
You must supply the following tools:
1/4-inch flat blade screwdriver
•
Wood brace mounting only: four 5/8-inch diameter, 3-inch long lag bolts
•
:
Only UL listed parts and components will be used for installation. Use UL
:
To maintain Overvoltage (Installation) Category II, install a suitable surge
:
The WBS-2400 must be installed only with the equipped antennas.
:
A minimum distance of 40cm from the WBS-2400's antenna should be
:
Read and save these instructions. Heed all warnings. Follow all
:
Do not modify the construction of this product. Modifying the operating
:
This device is for use outdoors or indoors on the condition that operation
Installing the Wavion WBS-2400 Metro Base Station
Installation Guide 11