Setup Storage And Load - UNI-T UTD2052CL+ User Manual

The DSO setting, waveform and screen image can be store in DSO or USB, the stored
setting or waveform can be recalled when needed. Press STORAGE to enter storage
setting interface.
9.1 Set storage and load
Press the Storage button, then Press F1 to choose storage type Setup, and you will see
the following menu.
Function Menu Setting
Type Setup
Storgte medium DSO, USB
Delete/File name
Save
Load

Edit file name
When the storage medium is USB, the stored file name can be edited, press file name to
enter file name edit window, as shown in the figure below:
Move the cursor by adjusting multifunctional knob, press multifunctional knob switch
to choose number or letter, press CONFIRM to go back to previous menu.
Chapter IX Storage
Figure 9-1 Function Key of STORAGE
Table 9-1 Storage setting menu
Description
Select storage type as setup.
Select storage location. DSO can store 20 groups, USB can sotre 200
groups.
Delete: Delete the stored files. File name: The menu will change to file
name when the storage medium is USB.
Store the file to current designated storage location.
Load the previous storage location in current designated storage location to
get the DSO back to stored setting status.
Figure 9-2 File name window
43
UTD2000 Series User Manual