Specifications - BW Technologies MicroDock II User Manual

MicroDock II
User Manual

Specifications

The MicroDock II is for indoor use only.
Instrument dimensions: 21.2 x 26.3 x 8.2 cm
(8.3 x 10.4 x 3.2 in.) base station and one docking module
Weight: 0.98 kg (2.15 lb)
Base system ingress protection: IP20
Enclosure: Impact resistant PC/ABS (polycarbonate)
Operating temperature: +10°C to +35°C (+50°F to +95°F)
0 to 50%
Humidity:
Altitude: 2000 m (6561.66 ft.)
Storage temperature: -10°C to 60°C (14°F to 140 ºF)
Power supply: 6 Vdc , 1.5 A wall adapter or four C-cell batteries
(main supply voltage fluctuations are not to exceed 10% of the nominal
supply)
Pollution degree: 2
Installation category: I
Real-time clock: Provides time and date stamp
Data storage: Automatic (instrument and base station)
128 MB Delkin MMC data storage system
External interface: USB interface for PC
Pump: DC motor, micro-diaphragm; 3V PCB mount
Flow rate: Maximum recommended 350 ml/min.
Calibration gas cylinder inputs:
2-gas inlets (standard)
4-gas + air inlets (maximum)
Automatic tests: Functional bump test, calibration, data transfer, audi-
ble alarm, visual alarm
88
Configuration recognition: Automatic (instrument and sensor)
Alarm/calibration parameters: User-defined
Calibration gas connections: Built-in (base station)
Gas connection: 1/8" SMC connect sub-miniature coupling
Solenoid: Built-in (docking modules)
LED indicators: (on each docking module)
Yellow – Test
Green – Pass
Red – Fail
Command keys:
Base station Menu navigation
One touch bump test initiation
One touch calibration initiation
(not applicable to the GasAlertClip Extreme)
Docking module
One touch data transfer initiation
(GasAlert Extreme, GasAlertMicroClip, and
GasAlertMax XT only)
Communications method: Infrared (two-way) between docking module
and detector (not applicable to the GasAlertClip Extreme – one way
communication only)
USB port for connection to a:
Personal computer (PC), or
USB over IP HUB
Audio
Sensors:
Optical
LCD: 4 line x 16 characters, wide viewing angle, user-defined backlight-
ing
Warranty: 2 years