MicroDock II
User Manual
•
Use only BW approved batteries; do not use alkaline or other rechargeable batteries with this charger.
•
For indoor use only.
•
Do not immerse the charger in liquids.
•
Do not expose the charger to electrical shock or severe continuous mechanical shock.
•
Ensure the detector battery pack is locked in place before operating the detector.
•
To eliminate the risk of electrical shock, disconnect and deactivate the charger when cleaning or performing mainte-
nance.
•
Avoid touching the charger and detector contact pins.
•
Substitution of components may impair Intrinsic Safety of the detector under charge.
•
Do not charge the battery pack with any other charger.
•
Do not attempt to disassemble, adjust, or service the charger unless instructions are provided to perform a procedure,
or a part is listed as a replacement part in the user manual. Use only BW Technologies replacement parts. Refer to
Replacement Parts and
•
The charger warranty will be void if a customer, personnel, or third parties damage the charger during repair attempts.
Any non-BW Technologies by Honeywell service/repair attempts will void this warranty.
Symbol
n
X
4
Accessories.
Approved to both U.S. and Canadian Standards by CSA International
Conforms to European Union Directives
a Cautions
Table 1. International Symbols
Description