Backlight; About - BW Technologies MicroDock II User Manual

MicroDock II
User Manual
C C
5. Press or
Or
Press C exit to return to the normal operation.

Backlight

Backlight enables, disables, or selects auto mode for the LCD lighting.
The auto mode automatically disables the backlight when the base sta-
tion is not in use.
The base station is shipped with the auto backlight option
enabled. While operating from battery power only, select auto
mode or (off) to conserve the batteries.
To enable/disable or select auto backlight, complete the following:
1. From the user options menu, press
the Backlight option.
2. Press C sel to select the option and access the field ( changes
to ).
46
to scroll to another user option.
Note
C or C
3. Press
Each selection displays beside Backlight and the backlight acti-
vates and deactivates, depending upon the selection.
4. Press
( changes back to ).
5. Press
Or
Press
to scroll to

About

About displays the firmware revision for the base station and each dock-
ing module that is connected. To view the firmware revision for the base
station and docking module(s), complete the following:
1. Press
C C
or to scroll through the options.
Enabled
Disabled
Automatic
auto
C
sel to save the selection and exit the field
C or C to scroll to another user option.
C exit to return to normal operation.
C C
or to scroll to the About option.