Table of Contents
Advertisement
If a gas conflict is detected by the base station, the gas conflicts screen
automatically displays.
Refer to the following sections,
ceeding to resolve gas conflicts, refer to the following section
Option.
Abort Option
The Abort option is located in the gas conflicts screen. Selecting Abort
exits the gas conflict function and the base station returns to normal
operation. A bump test or calibration will not be performed.
Proceed to the user options menu and select the Inlet Setup option.
To abort a gas conflict, complete the following:
1. From the gas conflicts screen, press
Conflicts
and
Not
Found. Before pro-
C
more.
2. The conflicts/not found screen displays.
3. Press
Abort
4. When
OK. The base station automatically exits the gas conflict and
returns to the normal operation.
Conflicts
If a conflict occurs, it must be resolved to continue the bump test or cali-
bration. The user may select the gas inlet or accept the gas inlet sug-
gested by the base station.
Press
C
cancel to exit the gas conflict screen and return to normal
operation. A bump test or calibration will not be performed.
C
or
C
to scroll to the Abort Test option.
displays beside Abort Test, press
MicroDock II
Gas Conflicts
C
C
sel or press
55
- Quick Links:
- Getting Started
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
