7. To select a different gas type, press
indicate that the field is activated. Press
through the list of gas types.
8. When the desired gas type displays, press
to confirm the new selection and to deactivate the field.
9. To enter the gas concentration level for the selected gas, pro-
ceed to the following section
Or
Press
C
exit to return to the user options menu.
10. Press
C
exit again to return to normal operation.
Gas Concentration Level
Depending upon the gas type selected, ppm, %LEL, or % displays
beside the gas concentration level.
The following gas concentrations are factory configured and
cannot be changed:
Four-gas-mix (4-Gas 2.5% vCH
•
Four-gas equivalent (4-Gas Equiv.)
•
mix (3-Gas SO
•
Three-gas SO
2
The Custom 4-Gas, Custom 3-Gas, and Custom 2-Gas can be
•
modified. However, only the gas concentration levels can be
changed.
C
changes to
sel.
C
or
C
C
changes to
sel.
Gas Concentration
Level.
Note
)
4
Mi)
2
C
to
11. Press
to scroll
12. Press
C
changes to
For custom and multi-gas: All of the applicable gases display
(for 4-Gas press
rently not displayed).
to move
down to the gas concentration level.
or
sel. If the gas concentration level can be modified,
and the cursor displays below the first value.
C
to scroll to the remaining gas types cur-
MicroDock II
User Options Menu
43