Simrad GO XSE Operator's Manual page 19

For more information about configuration information, the Mercury
application page, the Mercury engine and vessel data displayed,
and the Vessel Control controller, refer to the VesselView® manual or
engine supplier.
Suzuki Engine panel
If a Suzuki C10 gauge is available on the network, a Suzuki engine
icon is added to the Home page. An icon is also added to the Page
editor. You can select to display the Suzuki engine panel as a full
page panel or as part of a multi-panel page.
The layout and content of the engine panel depends on selected
panel size. The digital gauges can be customized, refer to "Customizing
the panel" on page 157.
FUSION-Link integration
FUSION-Link devices connected to the NMEA 2000 network can be
controlled from the GO XSE system.
The FUSION-Link devices appear as additional sources when using
the audio function. No additional icons are available.
Refer to "Audio" on page 159 for more information.
BEP CZone integration
The GO XSE integrates with BEP's CZone system used for controlling
and monitoring a distributed power system on your vessel.
The CZone icon is available in the Tools panel on the Home page
when a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the GO XSE Installation manual for how to
install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone
dashboard is added to the Instruments panels.
You switch between a panel's dashboards by selecting the left and
right arrow symbols or by selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for
each of the gauges. Available editing options depend on the type of
gauge and which data sources that are connected to your system.
19
Introduction | GO XSE Operator Manual