Calling An Ais Vessel; Ais Sart - Simrad GO XSE Operator's Manual

Calling an AIS vessel

If the system includes a VHF radio supporting DSC (Digital Select
Calling) calls over NMEA 2000, you can initiate a DSC call to other
vessels from the GO XSE.
The call option is available in the AIS Vessel Details dialog, and in
the Vessel status dialog activated from the Tools panel.
From the Call dialog you can change channel or cancel the call. The
Call dialog is closed when the connection is established.

AIS SART

When an AIS SART (Search and Rescue beacon) is activated, it starts
transmitting its position and identification data. This data is received
by your AIS device.
If your AIS receiver is not compliant with AIS SART, it interprets the
received AIS SART data as a signal from a standard AIS transmitter.
An icon is positioned on the chart, but this icon is an AIS vessel icon.
If your AIS receiver is compliant with AIS SART, the following takes
place when AIS SART data is received:
151
AIS | GO XSE Operator Manual