Simrad GO XSE Operator's Manual page 148

148
Client settings
Displays information about the wireless hotspot your unit is
connected to or the last one your unit was connected to. You can
select the hotspot in the dialog to set it as a hotspot you want to
always connect to when in range or you can select to delete it.
Advanced
Initiates the Iperf and DHCP Probe tools that help in fault-finding
and setting up the wireless network.
Ú Note:
Iperf and DHCP Probe are tools provided for diagnostic
purposes by users familiar with network terminology and
configuration. Navico is not the original developer of these
tools, and does not provide support related to their use.
Internal Wireless
Select this option to enable or disable the internal wireless module.
Disabling wireless when not in use reduces the unit's power
consumption.
Wireless connection | GO XSE Operator Manual