Kronos 4000 series User Manual page 71

9. Press ENTER to save the settings and return to the Maintenance Mode screen.
10. Press the Symbology Setting soft key and use the On and Off soft keys to
indicate the type of bar codes used on your employees' badges. This allows
the timeclock to read the badges properly.
Symbology Setting
Code 3-of-9:
12-of-5:
UPC-A:
UPC-E:
Code 128:
EAN-8:
EAN-13:
Codabar:
On
11. Press ENTER to save the settings and return to the Maintenance Mode screen.
12. To create a password that allows access to the Maintenance Mode screen in
the future, press the More soft key and then the Change Password soft key.
Complete the following fields:
Settings
Old Password
New Password
Verify Password
13. Press ENTER to save the password and return to the Maintenance Mode
screen.
14. Press ESC to exit Maintenance Mode and return to the idle screen.
Series 4000 Badge Timeclock User's Guide
Description
Enter the old password, if there was one.
Enter the new password.
Enter the new password again to verify that you entered it
correctly.
Servicing the Timeclock
Off
On
Off
Off
Off
Off
Off
Off
Off
4-23