Chapter 4 Maintaining the Timeclock
Badge Test
Use Badge Test to check a badge or the badge reader. (The Badge test is not part
of the "Sequential Tests" function on page 4-56.)
Step
Display
1
Maintenance Mode idle
display
2
Maintenance Mode
display
3
Symboloy
Badge Data
Beeper Test
Use Beeper Test to check the Beeper. The beeper will beep twice at two different
pitches during this test. (The Beeper test is part of the "Sequential Tests" function
on page 4-56.)
Step
Display
1
Maintenance Mode idle
display
2
Maintenance Mode
display
3
Start Test?
4-54
Action
Press the More... soft key.
Press the Badge Test soft key.
Swipe a badge.
Action
Press the More... soft key.
Press the Beeper Test soft key.
Do one of the following:
!
Press ENTER to accept the default answer.
!
Press the toggle soft keys to select YES or NO,
and press ENTER.
ADP, Inc.