Kronos 4000 series User Manual page 68

Chapter 4 Maintaining the Timeclock
Performing Basic Configuration at the Series 4000 Timeclock
Whenever you restore the Series 4000 timeclock to the factory defaults, you must
complete the basic configuration settings on the timeclock before you can restore
the timeclock's overall configuration from the host application.
When the Series 4000 timeclock is first powered on and initializes ("boots up"),
the Communications Setting screen appears:
Changing comm settings causes a reboot!
Device ID
IP Address
Gateway
Subnet Mask
1. On the Communication Setting screen, complete the following fields, with
the help of your network administrator:
Settings
Device ID
IP Address
Gateway
Subnet Mask
4-20
Description
Enter an ID number (at least six digits) for the timeclock. The host
application uses this number to identify the timeclock.
Enter the IP address, including the periods, assigned to the timeclock
by your system administrator.
Enter the IP address, including the periods, of the default device that
forwards data to the host application. This field holds up to 15 digits.
Specify a number that identifies a subnetwork so that an IP address
can be found on a LAN. This field holds up to 15 digits.
ADP, Inc.