Tra Adj (E; Dr/Exp (Dual Rate/Exponential) - GRAUPNER X-8E Manual

TRA ADJ (End Point Adjustment)
NORMAL
BACK
ST
LEFT RIGHT
100%
TH
BRK
100%
CH3
UP
100%
CH4
UP
100%

DR/EXP (Dual Rate/Exponential)

NORMAL
BACK
STEERING
CH
D/R 100%
EXP 0%
NORMAL
BACK
THROTTLE
CH
D/R 100%
EXP 0%
28 / 48
End Point Adjustment
SERVO
100%
FW
100%
DN
100%
DN
100%
To set the DR (Dual Rate) and EXPO (Exponential) function for
SERVO
the steering and throttle channel, press the STEERING or
THROTTLE button in the CH line. All setting changes are rep-
resented in the diagram.
Setting STEERING channel
D/R: 0% - 100% Limit the steering course. Press the <+ or ->
keys to raise or lower value. Press the curved arrow key to reset
to the default value (100%).
EXP: -100% to + 100% Exponentially change the steering
course. Press the <+ or -> keys to raise or lower value. Press
the curved arrow key to reset to the default value (0%).
Setting THROTTLE channel
SERVO
D/R: 0% - 100% Limit the throttle course. Press the <+ or ->
FWD
keys to raise or lower value. Press the curved arrow key to reset
TYPE
to the default value (100%).
EXP
EXP: -100% to + 100% Exponentially change the throttle
course. Press the <+ or -> keys to raise or lower value. Press
the curved arrow key to reset to the default value (0%).
FWD: Choose between forward and brake area. Refer to the
D/R and EXP settings described above and the FWD/BRK set-
tings described on the following page.
TYPE: Select between EXPO or throttle CURVE
CURVE: Refer to the setting instructions on the following page.
BACK
This function sets the maximum
travel of the servo per channel.
The left and right deflection can be
set separately in the range from
0% - 150%. Press the related
button. Change the values by
pushing the <+ or -> keys. Press
the curved arrow key to reset to
the default value (100%).
S1008_X-8E_jh_V1