Sw Set - GRAUPNER X-8E Manual

NORMAL NEXT
BACK
DATE
SET 2
2048
/
TIME
16 : 20 : 27
BATTERY TIME
1 : 19 : 33
B.RES
MODEL TIME
1 : 02 : 52 M.RES

SW SET

NORMAL
BACK
Control Key
>>
Direct Button
>>
Menu Screen
>>
NORMAL
BACK
FUNC REV T/S
SW
ST TRIM NOR
TR1
TH TRIM NOR
TR2
CH3
NOR
TR3
ST D/R NOR
TR4
NEXT
NORMAL
BACK
No Display
TELE.
1.
SERVO
2.
ACT
ON
34 / 48
DATE/TIME
Date/Time and Battery/Model Time settings menu.
From the TIMER menu, press the NEXT button at the top of the
11
/
screen.
DATE/TIME
To set the date and time, press the SET button under the DATE
line. This unlocks the Year, Month, Day, Hour, Minute and Sec-
ond fields. Select to highlight and press the <+ or -> keys to
raise or lower value. To save and lock the fields, press SET
again.
BATTERY/MODEL TIME
To reset the battery or model times to zero, press the B.RES or
M.RES buttons.
SERVO
Control Key
Use this menu to assign functions to trim buttons, switches and
rotary controls. Some buttons and switches have default func-
tions assigned. All buttons, switches, controls and defaults can
be assigned as follows:
1. Press the Control Key arrow >> button to bring up the
Function screen.
2. Press the NEXT button to scroll through the screens.
3. Press the control button to select the desired function for
the control. Depending on the control there are different
SERVO
functions available here. Assigned functions are greyed
out. (See list on the next page.)
1
4. Press the <+ or -> keys to select the function.
1
REV/NOR: To change between normal and reverse switch
function, press the button under REV to toggle between options.
1
T/S: To set the increase number for each click or step, press
1
the <+ or -> keys to raise or lower value. Press the curved arrow
key to reset to the default value (1). Only available on trims and
rotary controls.
Direct Button
To assign a menu shortcut function to buttons S1, S2 (under the
SERVO
display):
1. Press the button on line 1 to set S1; line 2 to set S2.
2. Press the <+ or -> keys to scroll through display options.
3. To activate settings press the ON or OFF button on the
ACT line.
S1008_X-8E_jh_V1