Connecting Ir Connection Box To Power Source; Connecting Travel Sensor With An Ir Connection Box Connected To The Power Source - Miller 301182 Owner's Manual

5-13. Connecting IR Connection Box To Power Source

1
Front
5-14. Connecting Travel Sensor With An IR Connection Box Connected To The Power
Source
1
2
Back
Back
3
1 Connection Box
Plug connection box into th thermocouple inputs
on the front panel of the power source.
2 14-Pin Cable
Connect 14-pin cable on connection box to the
lower 14-pin connector on the back of the power
source.
1
2
Front
1 Connection Box
2 Travel Sensor Cable
Connect 14-pin end of travel sensor cable to re-
ceptacle RC7 on the connection box.
3 14-Pin Pigtail
For use with optional on/off remote.
Ref. 262 416-B
277 846-A
OM-261823 Page 17