14-Pin Plug Information For Connecting Wire Feeder To Power Source; Front Panel Remote 4-Pin Information - Miller 300577001 Owner's Manual

5-4. 14-Pin Plug Information For Connecting Wire Feeder To Power Source

J A
K
I
B
L
H N
C
M
G D
F
E
*The remaining pins are not used.

5-5. Front Panel Remote 4-Pin Information

Notes
Pin*
A 24 volts AC with respect to socket G.
B Contact closure to A completes 24 volts AC contactor control circuit.
G Circuit common for 24 volts AC circuit.
C +10 volts DC input from power source to wire feeder with respect to socket D.
D Remote control circuit common.
E 0 to +10 volts DC output signal from wire feeder to power source with respect to socket D.
H Voltage feedback; 0 to +10 volts DC, 1 volt per 10 arc volts.
F Current feedback; 0 to +10 volts DC, 1 volt per 100 amperes.
L 0 to +10 volts DC output signal from wire feeder to power source with respect to socket N.
M CC/CV select 0 to +10 volts DC.
N Feeder common.
K Not used.
Pin
1 +15 volts DC isolated supply.
2 Trigger input with respect to pin 1.
When connected to a cobot, trigger input is reassigned for remote jog.
3 Dual schedule input with respect to pin 4.
When connected to a cobot, dual schedule input is reassigned for remote purge.
4 +15 volts DC isolated supply.
Pin Information
Pin Information
OM-286683 Page 17