14-Pin Plug Information For Connecting Wire Feeder To Power Source; Wire Type, Size, And Optimal Wire Feed Speed Table - Miller 300739 Owner's Manual

5-4. 14-Pin Plug Information For Connecting Wire Feeder To Power Source

J A
K
I
B
L
H N
C
M
G D
F
E
*The remaining pins are not used.

5-5. Wire Type, Size, And Optimal Wire Feed Speed Table

Motor Speed Wire Type
Standard All
Standard All
Notes
Pin*
A 24 volts AC with respect to socket G.
B Contact closure to A completes 24 volts AC contactor control circuit.
G Circuit common for 24 volts AC circuit.
C +10 volts DC input from power source to wire feeder with respect to socket D.
D Remote control circuit common.
E 0 to +10 volts DC output signal from wire feeder to power source with respect to socket D.
H Voltage feedback; 0 to +10 volts DC, 1 volt per 10 arc volts.
F Current feedback; 0 to +10 volts DC, 1 volt per 100 amperes.
L 0 to +10 volts DC output signal from wire feeder to power source with respect to socket N.
M CC/CV select 0 to +10 volts DC.
N Feeder common.
K Not used.
Wire Size
.035 To .062 in. (0.9 To 1.57 mm)
5/64 in. (2 mm)
Pin Information
Rated Speed Range (per IEC 60974-5)
55 To 770 ipm (1.4 To 17.8 mpm)
55 To 700 ipm (1.4 To 17.8 mpm)
OM-273243 Page 15