Link Layer Protocol; X.213 Priority - HP auroraTempo User Manual

aurora Tempo - User Guide

Link Layer Protocol

Use this option to add a link layer protocol parameters
information element to the Call Setup message.
• Choose Link Layer Protocol from the SVC
Configuration menu to display a sub-menu of
further options :
• Highlight each option and press the RIGHT arrow
key to display a sub-menu and enter a value in the
given range. The options are as follows :
Tx Window size
Retrans Timer

X.213 Priority

Use this option to add an X.213 priority information
element to the Call Setup message.
• Highlight X.213 Priority in the SVC Configuration
menu and press the RIGHT arrow key to toggle
between a tick ( ) or a cross ( ). When a tick is
selected a sub-menu is displayed with further
options.
• Highlight each option and press the RIGHT arrow
key to display a sub-menu. Enter a value in the
given range. The options are shown below :
5-14
Transmit window value.
Retransmission timer.
423972