HP auroraTempo User Manual page 187

Each timeslot is represented by a box. The following symbols
are used within these boxes to indicate the status of each of
the timeslots :
X
• Use the arrow cursor keys to move the highlighted box
to select a different timeslot. The Current Slot is
displayed at the right hand side of the window.
2
Note
When you switch on CAS it uses timeslot 16, and CAS is
displayed in timeslot 16 on the slot map. This means that
you cannot assign timeslot 16.
Assigning a timeslot
• To assign a timeslot, press ENTER or F1 Assign
Timeslot - the highlighted timeslot is assigned to the
interface and
OR
• To assign all the timeslots, press F2 Assign All
Timeslots.
Deselecting a timeslot
• To deselect a timeslot, press ENTER or F1 Clear
Timeslot - the highlighted timeslot is deassigned from
the interface and
OR
• To deselect all the timeslots, press F3 Clear All
Timeslots.
Saving your selections
• Press F6 Save And Exit
window.
Issue 1a - 10/99
The timeslot is not assigned to the interface.
The timeslot is assigned to the interface.
is displayed in the box.
is displayed in the box.
X
F6 Save And Exit to save and exit the timeslot
F6 Save And Exit F6 Save And Exit
F6 Save And Exit
Tempo
Configuring aurora
6-9