To Inject Alarms And Errors; To Inject Protocol Layer Alarms And Errors - HP E5200A User Manual

Using the Analyzer

To Inject Alarms and Errors

To Inject Alarms and Errors

The analyzer can generate the following types of alarms and errors:
You must be transmitting traffic to be able to inject alarms or errors.
For more details about simulating and injecting alarms and errors, see the
User Online Help.

To Inject Protocol Layer Alarms and Errors

The analyzer can generate the following protocol layer alarms and errors:
Display the Protocol Alarms/Errors window in either of the following ways:
2-48
protocol layer alarms and errors
physical layer alarms and errors
frameword errors
ATM and AAL errors
OAM alarms
cell losses
From the Simulate menu, select the required port; then select Protocol
Alarms/Errors.
Click the Simulate tab for the required port to display the Simulator;
then click the Protocol Alarms/Errors button.
Note For optical interface pods, the laser is automatically switched off when you log in
to the analyzer. You must turn the laser on when you are ready to simulate traffic, alarms,
or errors. When you are not simulating traffic, alarms, or errors, make sure the laser is off.
To turn the laser on or off, either
Click the Laser On or Off button on the Simulator.
From the Simulate menu, select the required port; then select Laser On or Off.