Setting The Display Language; Switching Audio Warnings On And Off; Setting Up Aurora Tempo For Remote Control; Applying Factory Defaults - HP auroraTempo User Manual

aurora Tempo - User Guide
Applying your changes
• Choose Set Date/Time (or press the LEFT arrow
key from the Date/Time sub-menu) to apply the
new date and time settings.

Setting the Display Language

At present only English is available.

Switching Audio Warnings On and Off

You can switch the audio warnings produced by aurora
on or off:
• Highlight Audio and press the RIGHT arrow key to
toggle between ( ) or a cross ( ). When a tick is
displayed the audio warning is switched on.
Tempo
Setting up aurora
For information on how to set up aurora
Remote Control User Guide Annex.

Applying Factory Defaults

You can apply aurora
Note that this option is only available when you have not
assigned any interfaces to aurora
Caution
All your files (traffic, statistics, results etc.) are deleted
from aurora
defaults. If you want to apply the defaults without
deleting your files, please refer to Applying Configuration
Defaults.
• Choose Set Factory Defaults from the System Config
menu. Please refer to Applying Configuration Defaults
in this chapter for a list of the default settings.
6-14
for Remote Control
's pre-configured default settings.
Tempo
.
Tempo
's memory when you apply factory
Tempo
Tempo
, see the
Tempo
423972