aurora
Tempo
- User Guide
Configuring aurora
This chapter discusses how to access the Configuration
function to display and change aurora
system settings.
It also tells you how to set up and save your own user
defined configuration files and then how to apply these at
a later stage. Also discussed is how to apply aurora
factory default settings.
Accessing Configuration
You can access the Configuration function in one of two
ways :
•
Choose Setup Config from the Main Menu or
•
Press the CNFG key.
aurora
window which shows the current setup of the interfaces.
The following example shows a typical window :
2
Note
aurora
Interface Type from the cable connected.
6-2
displays the Configure Physical Interface
Tempo
automatically detects and displays the V&X
Tempo
Tempo
's interface and
Tempo
's
Tempo
423972