Resetting The Statistical Counters; Displaying Statistics For A Different Dlci; Displaying Interface Statistics - HP auroraTempo User Manual

Resetting the Statistical Counters

You can reset the statistical counters back to zero.
• Choose F2 Reset Statistics. The counters are reset to
zero.

Displaying Statistics for a Different DLCI

The current interface and DLCI are displayed at the top of
the screen. You can display statistics for other DLCIs
without leaving this window :
• Press the F3 Next Statistics and F4 Previous
Statistics function keys to display statistics for the
next and previous DLCI values.

Displaying Interface Statistics

You can display detailed statistics on the interface you
are testing such as the number of frames sent and
received or the number of frames with FCS bits set.
Statistics are updated on the screen once every second.
2
Note
These statistics are similar to those displayed previously
for a DLCI but are for the interface as a whole and not
just for a particular DLCI. Please refer to Getting
Detailed Statistics on a DLCI earlier in this section for
further details.
• Press the F1 Interface Statistics function key from
the Detailed Statistics window. The following
additional interface statistics appear :
FCS Frames
Issue 1a - 10/99
Frame Relay Testing - Section 2
This is the number of frames transmitted
over the interface with their Frame Check
Sequence (FCS) incorrect.
5-49