HP auroraTempo User Manual page 156

aurora Tempo - User Guide
Specifying the Source IP Address
To specify the IP address of the source in dotted decimal
format you input each individual part of the decimal. The
following diagram shows how each part of this value is
made up :
Tempo' s IP addr .bbb Tempo' s IP addr .ccc
Tempo' s IP addr aaa.
123 . 123 . 123 . 123
• Highlight Tempo' s IP addr aaa and press the RIGHT
arrow key to display the Tempo' s IP addr aaa. sub-
menu.
• Enter the first part of the decimal value. This must be
within the given range or *CHECK RANGE* is
displayed.
• Press ENTER to save and exit the sub-menu. The
Setup Test Config window displays the first part of
the source IP address.
• Now repeat the above steps for Tempo' s IP addr
.bbb, Tempo' s IP addr .ccc and Tempo' s IP addr
.ddd to input the rest of the source IP address.
5-76
Tempo' s IP addr .ddd
423972