OPTIMOD PC
•
The 1101 will not respond to unrecognized commands.
•
The character code supported is ASCII.
Connecting via TCP/IP Using a Terminal Program on a PC
•
You can use the 1101 with any computer or terminal that is compatible with
TCP/IP networking.
•
The OPTIMOD-PC Service Settings determine network connection security:
A) Using the OPTIMOD-PC Control Application, select T
B) Assign an available TCP/IP Port. (Default is 11101.)
C) Uncheck "Use localhost only for Terminal Access."
D) (Optional) Check "Use Network Accept List" and add allowed IP addresses to
list.
•
Connect your computer or terminal with an Ethernet cable:
A) Connect an appropriate Ethernet cable on your terminal, computer, or device
to either an Ethernet port on the 1101's host computer or the Ethernet net-
work that will allow access the 1101 host computer.
• If connecting to a standard Ethernet network, use a standard Ethernet ca-
ble and TCP/IP network connection.
• If connecting directly to another computer, use a crossover Ethernet cable.
CONTROL API
> S
S
OOLS
ERVICE
ETTINGS
6-13
.