Table of Contents
Advertisement
4-2
SOFTWARE SUMMARY
Driver
Service
Agent (Tray Icon)
•
Optimod2.inf
– OPTIMOD-PC Driver Install Information
•
Always required for operation of OPTIMOD-PC, except as noted in the section
Hardware I/O and PCI Expansion Chassis on page 4-3.
•
Provides basic sound card operation for Windows WAVE I/O.
•
Provides advanced sound card operation when used with Control Application
and Service.
•
Cold boot without OPTIMOD-PC Service: driver loads default I/O and default
DSP.
•
Cold boot: driver loads defined I/O and default DSP.
•
Warm boot: driver does not reload DSP.
•
The driver is not required for OPTIMOD-PC to pass audio from its hardware ana-
log or digital inputs to its hardware outputs. Therefore, if Windows fails, the
OPTIMOD-PC hardware I/O continues to pass and process audio as normal. If
OPTIMOD-PC is located in an external PCI chassis, the host computer can lose
power or be turned off and OPTIMOD-PC will continue to pass and process audio
normally.
•
During cold boot: loads all user DSP preset information.
•
Provides remote control security and access.
•
Supports SNMP.
•
The Service is not required for computers that only remotely access OPTIMOD-PC
cards and where no OPTIMOD-PC card is installed locally.
•
The OPTIMOD-PC Agent is a tray icon that allows you to launch the OPTIMOD-PC
Control Application from the Windows System Tray.
•
If you right click the tray icon, a menu pops up with a checkable item named
A
-
UTO
START THE TRAY ICON
by default.)
•
If you uncheck A
UTO
you re-start the PC.
. (The "Auto-start the tray icon" item will be checked
-
, the tray icon will not re-appear when
START THE TRAY ICON
ORBAN MODEL1101
Advertisement
Table of Contents
