Table of Contents
Advertisement
6-14
CONTROL API
When a crossover Ethernet cable is used, at least one computer must
have a static IP address. The other computer may have a static address or
may have DHCP enabled.
To enable DHCP in a given computer, its Internet Protocol (TCP/IP) Prop-
erties must be set to "Obtain an IP address automatically." Internet Pro-
tocol (TCP/IP) Properties is also where you set a computer's static IP ad-
dress.
In either case, when using a crossover cable, both computers should be
assigned the same IP subnet unless special routing has been configured.
• You do not need to remove power from either your computer or the 1101
when you execute the instructions in step (A).
B) Start HyperTerminal. (You can usually access it from Start / Programs / Accesso-
ries / Communication.)
The N
C
EW
ONNECTION
C) Give your new connection a name and choose OK.
The C
T
dialog box appears.
ONNECT
O
D) Set the Connect Using field to "TCP/IP (Winsock)."
E) Set the Host Address to that of the 1101 host computer.
F) Set the Port Number to that of the 1101 host computer, (Default is 11101).
G) Choose OK.
Connection to the 1101 will be immediate and the 1101 connect banner
will display:
Orban OPTIMOD-PC 1101 Control vx.x.x.xx
dialog box appears.
ORBAN MODEL 1101
Advertisement
Table of Contents
