Orban OPTIMOD-PC 1101 Operating Manual page 26

Digital audio processor pci sound card
Hide thumbs Also See for OPTIMOD-PC 1101:
Table of Contents

Advertisement

1-12
INTRODUCTION
and 75μs. This allows it to protect preemphasized satellite uplinks and similar
channels where protection limiting or light processing is required. It can also be
used to process analog television FM aural carriers in television applications be-
cause these are usually processed lightly compared to FM radio.
Because its processing topology is most effective with "flat media,"
OPTIMOD-PC cannot provide extreme loudness for preemphasized radio
channels. Use one of Orban's Optimod-FM processors for this application.
For analog television with FM aural carrier(s), use Optimod-TV 8382.
Two-Band automatic gain control with window gating and selectable L/R or
sum/difference processing compensates for widely varying input levels.
Shelving bass equalizer and three-band parametric equalizer let you color
the audio to your exact requirements.
Low-IM look-ahead limiter effectively limits peaks while ensuring that low-
bit-rate codecs operate optimally without overload.
Starting with V3.2 software, Optimod-PC implements "true peak" control by
oversampling the peak limiter's sidechain at 192 kHz. This allows Optimod-PC to
prevent clipping in a playback device's analog signal path by predicting
and controlling the analog peak level following the playback device's recon-
struction filter to an accuracy of better than 0.5 dB. For typical program mate-
rial, accuracy is 0.2 dB
Without true peak control, analog clipping can occur even if all peak values of
the digital samples are below 0 dBFS. This phenomenon has also been termed
"0 dBFS+."
Thanks to true peak control, sample rate conversion, unless it removes high
frequency program energy or introduces group delay distortion, cannot cause
sample peaks to increase more than 0.5 dB. For example, sample rate con-
version from 48 kHz to 44.1 kHz is highly unlikely to cause sample peak clipping
in the 44.1 kHz audio data.
OPTIMOD-PC's dual-mono architecture allows entirely separate mono programs
to be processed in 5-band mode, facilitating dual-language operation.
In this mode, both processing channels operate using the same process-
ing parameters (like release time); you cannot adjust the two channels to
provide different processing textures.
Two AES3 or S/PDIF digital inputs with high-quality sample rate conversion
allow two asynchronous digital sources to be mixed: Ideal for network opera-
tions using local commercial/announcement insertion.
The second digital input also accepts AES3 house sync, synchronizing the AES3
output sample rate to the sample rate of the sync input.
ORBAN MODEL 1101

Advertisement

Table of Contents
loading

Related Products for Orban OPTIMOD-PC 1101

Table of Contents