Set Up Passwords And Card Names For Cards In Your Computer. (Optional) - Orban OPTIMOD-PC 1101 Operating Manual

OPTIMOD-PC
wired LOW. Pin 1 is ground. Figure 2-2 on page 2-5 shows how the cable
assembly is wired and can be used as a guide for making your own har-
ness.
Note that the diagram shows the rear view of the male connector that
terminates the cable assembly, not the front view. This is the same as the
front view of the female connector mounted on OPTIMOD-PC.
Note that balanced cables wired to the Tascam® standard are also com-
patible with OPTIMOD-PC. Unbalanced cables may not work with all in-
puts and/or outputs. Figure 2-2 also shows the Tascam color codes.

7. Set up passwords and card names for cards in your computer. (optional)

A) Start the OPTIMOD-PC control application,
("agent") in your computer's system tray, or from Start > Programs > Orban >
OPTIMOD-PC. (See Figure 2-3 on page 2-6.)
Newly installed cards have no passwords. You do not need to assign a
password to a card unless you want that card to be accessible to a net-
work connected to your computer.
Once you have assigned passwords, these passwords can be changed ei-
ther locally or on the network by anyone with the Administrator pass-
word for that card, but no one else. Do not lose the Administrator pass-
word you assign in the steps below.
B) Connect to the local card to which you are assigning a name and password.
C) From the Tools menu bar, choose "Administration."
Initially, OPTIMOD-PC software identifies a card by its serial number,
which it reads from the card. You can give the card an easily remembered
name ("alias") by filling in the C
OPTIMOD-PC software will then identify the card by this name from any-
where on the network.
D) Assign a User Password to the card by filling in the U
C P
ONFIRM ASSWORD
card via the OPTIMOD-PC Control Application.
E) Assign a Terminal Password to the card by filling in the T
and C
ONFIRM
to a card via OPTIMOD-PC TCP/IP terminal server to allow external control of
ARD
fields identically. This password allows you to connect to a
fields identically. This password allows you to connect
P
ASSWORD
Optimod.exe , by clicking its icon
N field.
AME
INSTALLATION
and
P
SER ASSWORD
P
ERMINAL ASSWORD
2-7