Table of Contents
Advertisement
2-40
INSTALLATION
•
The Processor Mixer AGC output taken after the equalizers
•
The output of the OPTIMOD-PC audio processing that follows all processing
except final peak limiting
•
The output of the OPTIMOD-PC audio processing that follows all processing,
including peak limiting.
The "processed without limiting" output can provide a low-delay moni-
tor feed back to live talent headphones because it has significantly lower
throughput delay than the "processed with limiting" output. Because the
look-ahead limiter contributes most of the time delay through the sys-
tem, listening from the output of the multiband compressor (ahead of
the look-ahead limiter) can be more comfortable to a DJ or presenter
who is monitoring his or her voice live through headphones.
Each of the outputs has an attenuator and a stereo peak-reading meter, which
indicates the post-attenuator level.
A) Using the drop-down menu, choose the source that feeds each output.
B) Set the output level of each output as desired, using its attenuator.
There is only one menu item for P
O
control in the C
UTPUT
the P
M
ROCESSOR
EQ) the equalizer section.
See the notes under step 2 on page 2-35 for more information on head-
room and calibrating for unity input/output gain.
Refer to Setting Output/Modulation Levels on 1-36 of this manual for ad-
vice on setting output levels and on their relationship to headroom.
Figure 2-10: Output Levels Page in I/O Mixer
ROCESSOR
page allows you to choose whether
ONFIGURATION
AGC output is taken before (P
IXER
ORBAN MODEL 1101
M
AGC. The AGC R
IXER
OUTER
-EQ) or after (P
RE
-
OST
Advertisement
Table of Contents
