Displaying And Maintaining Ipv6 Pim - HP MSR1002-4 Configuration Manual

•
Do not configure MLD features on IPv6 ADVPN tunnel interfaces that are enabled with NBMA
mode.
Configuration procedure
To enable NBMA mode for an ADVPN tunnel interface:
Step
1. Enter system view.
2. Enter interface view.
3. Enable NBMA mode.

Displaying and maintaining IPv6 PIM

Execute display commands in any view.
Task
Display register-tunnel interface
information.
Display BSR information in the
IPv6 PIM-SM domain.
Display information about the
routes used by IPv6 PIM.
Display C-RP information in the
IPv6 PIM-SM domain.
Display DF information in the IPv6
BIDIR-PIM domain.
Display IPv6 PIM information on
an interface.
Display IPv6
information.
Display IPv6 PIM routing entries.
Display RP information in the IPv6
PIM-SM domain.
Display statistics for IPv6 PIM
packets.
Display remote end information
maintained by IPv6 PIM for IPv6
ADVPN tunnel interfaces.
Command
system-view
interface
interface-number
ipv6 pim nbma-mode
Command
display interface [ register-tunnel [ interface-number ] ] [ brief
[ description| down ] ]
display ipv6 pim [ vpn-instance vpn-instance-name ] bsr-info
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route
[ ipv6-source-address ]
display ipv6 pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
display ipv6 pim [ vpn-instance vpn-instance-name ] df-info
[ ipv6-rp-address ]
display ipv6 pim [ vpn-instance vpn-instance-name ] interface
[ interface-type interface-number ] [ verbose ]
display ipv6 pim [ vpn-instance vpn-instance-name ] neighbor
PIM neighbor
[ ipv6-neighbor-address | interface interface-type interface-number |
verbose ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table
[ ipv6-group-address
[ prefix-length ] | flags flag-value | fsm | incoming-interface
interface-type
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] rp-info
[ ipv6-group-address ]
display ipv6 pim statistics
display ipv6 pim [ vpn-instance vpn-instance-name ] nbma-link
[ interface { interface-type interface-number } ]
interface-type
[ prefix-length
interface-number
363
Remarks
N/A
N/A
By default, NBMA mode
disabled.
This command is applicable only
to IPv6 ADVPN tunnel interfaces.
] | ipv6-source-address
| mode mode-type
is
|