Msdp Configuration Task List; Configuring Basic Msdp Features; Configuration Prerequisites; Enabling Msdp - HP MSR1002-4 Configuration Manual

•
RFC 3446, Anycast Rendezvous Point (RP) mechanism using Protocol Independent Multicast
(PIM) and Multicast Source Discovery Protocol (MSDP)

MSDP configuration task list

Tasks at a glance
Configuring basic MSDP
•
(Required.)
•
(Required.)
•
(Optional.)
Configuring an MSDP peering
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring SA message-related
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)

Configuring basic MSDP features

All the configuration tasks in this section should be performed on RPs in PIM-SM domains, and each
of these RPs acts as an MSDP peer.

Configuration prerequisites

Before you configure basic MSDP features, complete the following tasks:
•
Configure a unicast routing protocol so that all devices in the domain can interoperate at the
network layer.
•
Configure PIM-SM to enable intra-domain multicast.

Enabling MSDP

Step
1. Enter system view.
2. Enable IP multicast routing
and enter MRIB view.
3. Return to system view.
4. Enable MSDP and enter
MSDP view.
features:
Enabling MSDP
Specifying an MSDP peer
Configuring a static RPF peer
connection:
Configuring a description for an MSDP peer
Configuring an MSDP mesh group
Controlling MSDP peering connections
parameters:
Enabling multicast data encapsulation in SA messages
Configuring the originating RP of SA messages
Configuring SA request messages
Configuring SA message policies
Configuring the SA cache mechanism
Command
system-view
multicast routing [ vpn-instance
vpn-instance-name ]
quit
msdp
vpn-instance-name ]
[ vpn-instance
152
Remarks
N/A
By default, IP multicast routing is
disabled.
N/A
By default, MSDP is disabled.