Table of Contents
Advertisement
Operation System Installation
Choose Install Software at the beginning of the CD and select Install SeaMAC to install the Windows
HDLC/SDLC driver. The SeaMAC Configuration utility that configures the driver will inform you that you must add
a driver before proceeding. For the ROUTE 56.PCI this feature is not to be used. After installing the software in
Windows NT/2000 power down the computer and install the card. Power the system back up and the driver will
automatically be loaded. The PCI BIOS will configure all resources for the card. You do not need to "add" a driver
through the SeaMAC Configuration utility. NOTE: The system's BIOS or Operating system assigns addresses and
IRQ's. There is one jumper to configure which selects whether pin 22 on the DB-25 is RI or DSR+.
System Installation
The ROUTE 56.PCI can be installed in any of the PCI expansion slots.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the PC case cover.
3.
Locate an available PCI slot and remove the blank metal slot cover.
4.
Gently insert the ROUTE 56.PCI into the slot. Make sure the adapter is seated properly.
5.
Replace the screw.
6.
Replace the cover.
7.
Connect the power cord.
Installation is complete.
The ROUTE 56.PCI has a number of cabling options available. These options include:
•
CA-103 - This cable provides a high quality shielded cable with the V.35 mechanical specification met on one
end and a DB-25S (female) on the other end. V.35 has a mechanical specification that is impossible to place on
a PC bracket and requires this adapter cable.
•
CA-104 - This cable provides a 6' extension for use with RS-232, and RS-530.
•
CA-107 - RS-530 (DB-25P) to RS-449 (DB-37P) cabling adapter. RS-530 is replacing RS-449 in Telecom
applications, but there is still a very large base of installed equipment that uses the RS-449 pin-out. Both
standards use RS-422 to define the electrical specifications and are interchangeable via this adapter cable.
Sealevel Systems ROUTE 56.PCI
Installation
Installation
Page 2
Advertisement
Table of Contents
