Table of Contents
Advertisement
Software Installation
Windows 95/98/ME/NT/2000/XP
Do not install the Adapter in the machine until the software has been fully
installed.
1. Start Windows.
2. Insert the Sealevel Systems CD in to your CD drive.
3. If 'Auto-Start' is enabled for this drive the software will automatically launch.
4. Select 'Install Software'.
5. Select the Part Number for your adapter from the listing.
6. Select 'Windows 98/ME/2000/XP'. The setup file will automatically detect the
7. A screen may appear with the declaration: "The publisher cannot be determined
8.
Linux
Refer to D:\software\seacom\Other\Linux\Linux.serial.readme (where D: = your
CDROM driver letter) found on the Sealevel Systems CD. This file contains valuable
information on installing your adapter in the various Linux releases. Also in this sub-
directory is the Linux SerialHOWTO. This series of files explains typical Linux
serial implementations, as well as informing the user to Linux syntax and preferred
practices.
3 rd Party Software Support
Third party software support for many HMI/MMI and other process control software
is included on the product installation CD. For the most up to date information on
third party software support, please visit
http://www.sealevel.com/thirdpartysoftware.asp.
© Sealevel Systems, Inc.
Otherwise, point your browser to the 'Index.htm' on the root directory of the CD
operating environment and install the proper components. Next (depending on
the OS version) select the 'Run this program from its current location' or 'Open'
option. Follow the information presented on the screens that follow.
due to the problems below: Authenticode signature not found." Please select the
'Yes' button and proceed with the installation. This declaration simply means
that the Operating System is not aware of the driver being loaded. It will not
cause any harm to your system.
During setup the user may specify installation directories and other preferred
configurations. This program also adds entries to the system registry that are
necessary for specifying the operating parameters for each driver. An uninstall
option is also included to remove all registry/INI file entries from the system.
- 3 -
SIO-485.LPCI User Manual
Advertisement
Table of Contents
