Software Installation - SeaLevel DIO-16.PCI User Manual

Software Installation

Windows Installation
D o not install the adapter in the machine until the software has been fully installed
Only users running Windows 7 or newer should utilize these instructions for accessing and installing
the appropriate driver via Sealevel's website. If you are utilizing an operating system prior to
Windows 7, please contact Sealevel by calling 864.843.4343 or emailing
receive access to the legacy driver download and installation instructions.
1. Select the download for the SeaIO Classic for Windows
- Sealevel.) The setup file will automatically detect the operating environment and install the
proper components. Next (depending on your browser) select the 'Run this program from its
current location' or 'Open' option. Follow the information presented on the screens that follow.
During setup, the user may specify installation directories and other preferred configurations.
This program also adds entries to the system registry that are necessary for specifying the
operating parameters for each driver. An uninstall option is also available to remove SeaIO
files and registry/INI file entries from the system.
2. A screen may appear with the declaration: "The publisher cannot be determined due to the
problems below: Authenticode signature not found." Please select the 'Yes' button and
proceed with the installation. This declaration simply means that the Operating System is not
aware of the driver being loaded. It will not cause any harm to your system.
3. During setup, the user may specify installation directories and other preferred configurations.
This program also adds entries to the system registry that are necessary for specifying the
operating parameters for each driver. An uninstall option is also included to remove all
registry/INI file entries from the system.
Windows software installation is complete.
Windows NT Card Installation: After accomplishing the above steps, bring up the Control Panel and
double-click on the SeaIO Devices icon. To install a new card, click "Add Port". Repeat this procedure
for as many SeaIO cards as you wish to install.
Linux Software: You may download the
additional information with this installation, please contact Sealevel's Technical Support:
support@sealevel.com.
© Sealevel Systems, Inc. 8002 Manual | SL9021 10/2022
(Software: SeaIO Classic V5 - Windows
SeaIO Classic for Linux Windows
.
support@sealevel.com to
for the 8002. If you need
6