Table of Contents
Advertisement
Overview
The Sealevel Systems PIO-24.PCI provides one 8255 mode 0 compatible port
providing two eight-bit ports and two four-bit ports. When configured as
outputs each bit of the two four-bit ports may be set or reset individually.
What's Included
The PIO-24.PCI is shipped with the following items. If any of these items is
missing or damaged, contact the supplier.
•
PIO-24.PCI Adapter
•
Sealevel Software CD
•
Industry Standard Relay Rack Cables are Available:
Part number CA135 for Edge Connection
Part number CA167 for IDC Connection
Card Setup
The PIO-24.PCI is a fully compliant PCI 'Plug and Play' adapter. All card
resources (i.e. I/O address, IRQ selection) are auto-assigned by either your
system BIOS or your 'Plug and Play' operating system.
Software Installation
For proper operation install software first. To install the software place the CD
in your CD-ROM tray and the auto-run program will start. If auto-run is not
available browse the CD and choose "index.htm". Choose Install Software at
the beginning of the CD. Select the Digital I/O software drivers and install
SeaIO prior to installing hardware.
Linux Users
Refer to the installation instructions at the beginning of the CD for details on
installing the Sealevel Systems digital I/O cards in Linux.
Sealevel Systems PIO-24.PCI
Introduction and Installation
Introduction
Installation
Page 1
Advertisement
Table of Contents
