Installation - SeaLevel ULTRA 485+2.PCI User Manual

Installation

Operating System Installation
For Windows Users
Begin by locating, selecting and installing the correct software from the
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The ULTRA 485+2.PCI can be installed in any of the PCI expansion slots and contains several jumper
straps for each port that must be set for proper operation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the ULTRA 485+2.PCI into the slot. Make sure that the adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.
© Sealevel Systems, Inc. 7204 Manual | SL9061 7/2021
Sealevel software driver database.
12