Side Panel - Sub-Zero ICBBI-36R Design Manual

BUI LT-I N R E FR IG ERATIO N

Side Panel

The custom side panels must be a minimum of 610 mm
deep and 13 mm thick. Routing will be necessary for the
side panel to fit flush against the side of the unit. Refer to the
illustrations below.
When installing a built-in unit with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are available through an authorized Sub-Zero
dealer.
610 mm
FRONT
OF SIDE
PANEL
3 mm
ROUT TO
48 mm
25 mm 2134
mm
108 mm
146
ROUT TO
mm
5 mm
(OVER-AND-UNDER
MODELS)
521
mm
102 mm
OPTIONAL
67
TOE KICK
mm
CUT-OUT
Side panel dimensions.
subzero-wolf.com.au
25 mm
48 mm
3 mm
13 mm
MAIN SIDE PANEL
FRAME ROUTING
Routing detail.
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer.
Refer to the chart below for standard handle lengths for
built-in models.
H A N DL E L EN GTH
Full Door
Over-and-Under Door
914 mm Drawer
1067 mm Drawer
TU BU L A R P R O
1622 mm 1147 mm
1124 mm 952 mm
770 mm 600 mm
922 mm 753 mm
|
22