Metra Electronics 99-3400 Installation Instructions Manual page 9

2-Shaft head unit provision
1. Attach the spacer to the radio housing.
2. Slide the aftermarket head unit into the
kit and secure with shaft nuts.
(Figure A)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly. (Figure B)
Kit Assembly 99-3400
Optional
(Figure A)
(Figure B)