I-Mark - Metra Electronics 99-3400 Installation Instructions Manual

1. Remove (2) Phillips screws from
each side of the dash trim bezel and
remove the bezel.
2. Remove (4) Phillips screws securing
the bracket assembly. (Figure A)
3. Remove the factory head unit and
disconnect the wiring.
4. Cut and remove all mounting tabs
on brackets set #2 EXCEPT tabs "A".
(Figure B)
5. The mounting tabs can be identified
by the stamped letter on the back of
each tab.
6. Using the v-cut as a guide, cut
and remove the bottom portion of the
radio housing.
7. Mount the converted brackets
to the housing with (4) #6 Phillips
screws supplied. (Figure C)
Continue to kit assembly
Dash Disassembly 99-3400
Isuzu I-Mark
1985-1991
(Figure A)
"A"
(Figure B)
(Figure C)
"A"