Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-6537B
Dodge Durango 2014-up
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted Black
• Touchscreen display for climate and
personalization features
KIT COMPONENTS
• A) Radio trim panel with touchscreen display • B) Radio brackets • C) Pocket
• D) (4) #8 x 3/8" Phillips screws • E) (6) Panel clips • F) HVAC interface and wiring harness (not shown)
A
B
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface and harness included Antenna Adapter: 40-EU55 (sold separately)
METRA – The World's best kits.
99-6537B
C
D
®
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– ISO DDIN radio provision ...................................... 3
Axxess Interface Installation ...........................4-13
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench • 5.5mm socket wrench
E
CAUTION!
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
Table of Contents
All accessories, switches, climate controls panels,
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-6537B
Summary of Contents for Metra Electronics 99-6537B
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-6537B Table of Contents Dodge Durango 2014-up 99-6537B Dash Disassembly ..........2 Kit Preparation ............2 Kit Assembly KIT FEATURES – ISO DIN radio provision with pocket ...... 3 • ISO DIN radio provision with pocket –...
-
Page 2: Dash Disassembly
99-6537B Dash Disassembly Kit Preparation 1. Unclip and remove the radio/ To the 99-6537CH radio trim panel: climate control panel. (Figure A) 1. Attach the (6) panel clips provided. 2. Remove the (4) 9/32 screws (Figure A) securing the radio/display screen, Continue to Kit Assembly and then unplug and remove. -
Page 3: Iso Ddin Radio Provision
99-6537B Kit Assembly ISO DIN radio provision with pocket ISO DDIN radio provision 1. Attach the pocket to the radio 1. Attach the brackets to the radio brackets using the (4) #8 x 3/8” using the screws supplied with Phillips truss-head screws provided. -
Page 4: Table Of Contents
99-6537B Axxess Interface Installation INTERFACE FEATURES TABLE OF CONTENTS • Provides accessory power (12-volt 10-amp) Connections to be made ................5-7 • Retains R.A.P. (retained accessory power) Installing the interface ................8 • Provides NAV outputs (parking brake, reverse, speed sense) Initializing the interface ................ -
Page 5: Connections To Be Made
99-6537B Connections to be made Attention! This interface will work with models that are either non-amplified, or From the 6537 harness to the aftermarket radio: amplified. Please follow the instructions carefully for your model vehicle. Failure to • Connect the Black wire to the ground wire. - Page 6 99-6537B Connections to be made Attention! This interface will work with models that are either non-amplified, or amplified. The following (3) wires are only for multimedia/navigation radios that require these wires. Please follow the instructions carefully for your model vehicle. Failure to do so will result in •...
- Page 7 99-6537B Connections to be made (cont.) 3.5mm jack - steering wheel control retention: • Universal “2 or 3 wire” radio: Connect the steering wheel control wire, referred to as Key-A or SWC-1, to the Brown wire of the connector. Then The 3.5mm jack is to be used to retain audio controls on the steering wheel control.
-
Page 8: Installing The Interface
99-6537B Installing the interface Initializing the interface Attention! If the interface loses power for any reason, the following steps It is highly advisable to read the following steps beforehand, to ensure a clear understanding of what is to be expected. The following steps must be done in the order that they are numbered. -
Page 9: Touchscreen Display Operation
99-6537B Touchscreen display operation HVAC Control screen Heated seats screen • This is the Heated/Cooled Seats, Heated Steering, and Mirror Dimming control screen • This is the HVAC control screen which will be displayed on the touchscreen display. This is considered the Main Menu screen. - Page 10 99-6537B Touchscreen display operation ECO/ESC/PARK-SENSE/SPORT/STOP-START screen • ECO – Fuel Economy Mode • ESC – Electronic Stability Control • PARK-SENSE – ParkSense Rear Park Assist System • SPORT – Sport Mode • STOP-START – Stop/Start System • This is the screen where you can access the “hard buttons” that were on the factory radio panel: ECO/ESC/PARK-SENSE/SPORT/STOP-START •...
- Page 11 99-6537B Touchscreen display operation (cont.) Configuration Settings screen • Steering Wheel Controls • Remap Buttons – For remapping the steering wheel control buttons • Dual Assign – For dual assigning the steering wheel control buttons (long button press) • Select Radio – For auto detecting the radio, or changing the radio type •...
-
Page 12: Steering Wheel Control Settings
99-6537B Steering wheel control settings Select Radio screen * Note: If the interface shows an Alpine radio, and you do not have an Alpine radio, that means the interface does not detect a radio connected it, i.e., an open connection. Verify that the 3.5mm jack is connected to the correct steering wheel jack/wire in the radio. -
Page 13: Steering Wheel Control Settings
99-6537B Steering wheel control settings (cont.) Remap Button screen Dual Assign screen • The interface has the ability to change the button assignment for the steering • The interface has the capability to assign two functions to a single button, wheel control audio buttons, except Volume-Up and Volume-Down.