Pickup - Metra Electronics 99-3400 Installation Instructions Manual

Honda Passport 1994-1995
Isuzu Amigo 1991-1994/Pickup 1988-1995
Rodeo 1992-1995/Trooper 1988-1991
1. Remove (2) Phillips screws from
the base of the radio trim bezel and
remove the bezel. (Figure A)
2. Remove (3) hex head bolts securing the
factory head unit and disconnect the
wiring.
3. Cut and remove all mounting tabs
on brackets set #2 except tabs "B".
(Figure B)
4. The mounting tabs can be identified
by the stamped letter on the back of
each tab.
5. Using the v-cut as a guide, cut
and remove the bottom portion of
the radio housing.
6. Mount the converted brackets
to the housing with (4) #6 Phillips
screws supplied. (Figure C)
Continue to kit assembly
Dash Disassembly 99-3400
(Figure A)
(Figure B)
(Figure C)
"B"
"B"