Auth Dynamic-Vlan-Creation - Allied Telesis CentreCOM GS948MPX Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH DYNAMIC VLAN CREATION

auth dynamic-vlan-creation

Overview This command enables and disables the Dynamic VLAN assignment feature.
The Dynamic VLAN assignment feature allows a supplicant (client device) to be
placed into a specific VLAN based on information returned from the RADIUS server
during authentication, on a given interface.
Use the no variant of this command to disable the Dynamic VLAN assignment
feature.
auth dynamic-vlan-creation [rule {deny|permit}]
Syntax
no auth dynamic-vlan-creation
Default By default, the Dynamic VLAN assignment feature is disabled.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
Usage If the Dynamic VLAN assignment feature is enabled (disabled by default), VLAN
assignment is dynamic. If the Dynamic VLAN assignment feature is disabled then
RADIUS attributes are ignored and configured VLANs are assigned to ports.
The optional rule parameter specifies the VLAN assignment rule when the second
supplicant's VLAN ID is different from VLAN ID from the first supplicant. If the deny
value is applied with the command then the second supplicant with a different
VLAN ID is rejected. If the permit value is applied with the command then the
second supplicant with a different VLAN ID is accepted and assigned to the first
supplicant's VLAN.
If you issue an auth dynamic-vlan-creation command without a rule parameter
then a second supplicant with a different VLAN ID is rejected. It is not assigned to
the first supplicant's VLAN. Issuing an auth dynamic-vlan-creation command
without a rule parameter has the same effect as issuing an auth
dynamic-vlan-creation rule deny command rejecting supplicants with differing
VIDs.
C613-50181-01 Rev B
Parameter Description
rule
VLAN assignment rule.
deny
Deny a differently assigned VLAN ID. This is the default rule.
permit
Permit a differently assigned VLAN ID.
Command Reference for GS900MX Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
970