Table of Contents
Advertisement
Chapter 1- Hardware Description
MPM/MPM+ and MPMx Media Cards
1-16
The RMX unit can work with either MPM or MPM+/MPMx (but not with
both simultaneously) media cards. The card type installed in the system
determines the Card Configuration Mode.
MPM+ cards are supported only with D-type chassis and software
version 4.x and later.
MPMx cards are supported only with D-type chassis and software version
7.x.
For more details about the chassis type, see "RMX Chassis Types" on
page 1-28.
ISDN support is the same for all card types.
Table 2 summarizes the resource capacities of the various resolutions per
card type in CP Conferencing Mode.
Table 2
MPMx, MPM+ and MPM Resource Capacity per Resolution in CP
Resource Type
HD720p60/HD1080p30
Symmetric
HD720p60/HD1080p30
Asymmetric
HD720p30
SD
CIF (H.264)
CIF (H.263)
Audio only (VoIP)
Maximum Possible Resources Per Card
MPM
MPM+
Not
Applicable
Not
Applicable
10
10
20
10
30
40
80
40
80
200
400
MPMx
15
15
30
60
90
60
360
Advertisement
Table of Contents
