Preventative Maintenance - Stairmaster GAUNTLET Series 8 Service Manual

PREVENTATIVE MAINTENANCE

Preventive maintenance (PM) is a schedule of planned maintenance actions aimed at the prevention
of failures. PM is the best way to preserve and enhance equipment reliability by keeping key com-
ponents clean and free of debris. PM activities may include cleaning, vacuuming, visual inspections
of key components, lubrication, etc. The better your PM program is, the more dramatically you can
increase the life of your product and significantly reduce equipment failures.
With durable, high performance components, the 8 Series Gauntlet is designed for heavy usage
with minimal maintenance required. To keep it in top condition, perform regular daily, weekly,
and monthly preventative maintenance routines outlined below. It is the sole responsibility of the
owner of this equipment to ensure that regular maintenance is performed. Worn or damaged parts
must be replaced immediately, or the equipment removed from service until the repair is made.
TOOLS
Working on this product will require basic and/or sometimes specialty tools based on the type of
service that will be performed at any time. To assist, we recommend having the tools listed available
when performing maintenance:
Tool
Multi-meter
Socket Set, SAE
Socket Set, Metric
Socket driver
Open end wrenches, SAE
Open end wrenches, Metric
Hex Bit Socket Set, SAE
Hex Bit Socket Set, Metric
Adjustable Wrench
Snap Ring Pliers
Torque Wrench
With durable, high performance components, this equipment is designed for heavy usage with min-
imal maintenance required. To keep it in top condition, perform regular daily, weekly and monthly
Screwdriver Set, Phillips
Screwdriver Set, Flat
Tape Measure
Ball Pene Hammer
Rubber Mallet
USB - Flash Drive
Motorcycle straps, adjustable
Loctite 680
1' Jumper wire w/ alligator clips
zip ties – various sizes
USB Keyboard
Page 44