Participant Dtmf Controls; Moderator Dtmf Controls - NEC Univerge SV8100 User Manual

Revision 1.0
___________________________________________________________________________________
2.31
2.32
___________________________________________________________________________________
1 - 32

Participant DTMF Controls

The table below describes the controls currently available on the system for
participants during a conference. Press the code into your phone keypad,
including #, for each action.
Code
11#
22#
14#
15#
55#

Moderator DTMF Controls

The table below describes the controls currently available on the system for
moderators during a conference. Press the code into your phone keypad,
including #, for each action. Most of these controls are also available as web
controls on the RealView page.
Code
11#
22#
16#
31#
32#
33#
41#
42#
43#
44#
Table 1-1 Participant DTMF Controls
Description
Unmute Self
Raise Hand
Lower Hand
Enter voting mode.
Then enter vote digits, followed by #
Table 1-2 Moderator DTMF Controls
Description
Unmute Self
Self Mute all users
Initiate Dial out. Moderator will hear dial-tone.
Next, dial external party's number followed by #.
After conversing with the called party, use the
following two controls: 32# or 33#.
Bring external party into conference
Drop external party and re-join conference
Start recording
Stop recording
RGA Application Gateway Conference User Guide
SV8100
Mute Self
Mute Self
Mute all
Unmute all