Figure 1-13 Security Options - NEC Univerge SV8100 User Manual

Revision 1.0
___________________________________________________________________________________
___________________________________________________________________________________
1 - 18
The settings for when Participants enter the conference: Unmuted,
Moderator-muted, or Self -Muted should be selected. Unmuted is set at
default conferencing. Use Moderator-muted for Analyst Mode, or use Self
Muted for Classroom mode.
Security Options

Figure 1-13 Security Options

Check the Wait for Moderator to join box to indicate that the conference

does not begin until at least one party joins the conference using the
Moderator Access Code. The participants will hear the designated Hold
Music file until the moderator joins. If the field is not checked, the
conference will begin as soon as a second Participant enters the Access
Code.
Check the Disconnect lone participants box to automatically disconnect

the last Participant in the conference after the Moderator(s) and other
Participants have exited.
Check the Stop conference when moderator disconnects box to end the

conference when the moderator disconnects.
WARNING! Using this setting can cause problems if the moderator is
using a cell phone and loses voice path due to inadvertent connection
drops in the cellular network.
Callout Options
Figure 1-14 Callout Options
These options require that the Moderator have the Conference Dialout
Privilege. Please contact the System Administrator about activating this
feature.
Check the Progressive dial-out calls have Moderator privilege box to

give moderator privileges to any Attendees added using Progressive
Dialout. This can be used to add a moderator to a conference, i.e. to
continue a conference when the original moderator needs to leave.
RGA Application Gateway Conference User Guide
SV8100